HUD Code Manufactured Homes: These are homes built entirely in the factory under a federal building code administered by the U.S. Department of Housing and Urban Development (HUD). The Federal Manufactured Home Construction and Safety Standards (commonly known as the HUD Code) went into effect June 15, 1976. Manufactured homes may be single- or multi-section and are transported to the site and installed. The federal standards regulate manufactured housing design and construction, strength and durability, transportability, fire resistance, energy efficiency and quality. The HUD Code also sets performance standards for the heating, plumbing, air conditioning, thermal and electrical systems. It is the only federally-regulated national building code. On-site additions, such as garages, decks and porches, often add to the attractiveness of manufactured homes and must be built to local, state or regional building codes.

Every manufactured home is built in a factory, under controlled conditions, and has a special label affixed on the exterior of the home indicating that the home has been designed, constructed, tested and inspected to comply with the stringent federal standards set forth in the code. No manufactured home may be shipped from the factory unless it complies with the HUD Code and is released for shipment by an independent third party inspector certified by HUD.

The HUD Code is unique since it is specifically designed for compatibility with the factory production process. Performance standards for heating, plumbing, air conditioning, thermal and electrical systems are set in the code. In addition, performance requirements are established for structural design, construction, fire safety, energy efficiency, and transportation from the factory to the customer’s home site. Manufactured homes are constructed with virtually the same materials used in site-built homes. However, in contrast to traditional site-building techniques, manufactured homes have the advantage of using engineered design applications and the most cost-efficient assembly-line techniques to produce a quality home at a much lower cost per square foot. To ensure quality, the design and construction of the home is monitored by both HUD and its monitoring contractor. The familiar red seal (the certification label) attached to the exterior of a manufactured home indicates that it has undergone and passed perhaps the most thorough inspection process in the home building industry.